Port of Malabo · Equatorial Guinea

+240 222 777 745 info@asabage.com LinkedIn

Non-Destructive Testing

ASABA / SERVICES

Non-Destructive Testing

Non-destructive testing of welds and hull structures, defect detection and ultrasonic thickness measurements. ASABA's laboratory combines VT, MT, PT and UT for comprehensive inspection during shipbuilding, repair and maintenance. The method, inspection subject and programme are selected to meet the technical requirements.

At ASABA Shipyard

Non-Destructive Testing Laboratory

52 photos · Select a photo to enlarge.

Shaft surface contact check (Blue test)

Dye penetrant testing of flanges and fasteners

Dye penetrant testing of propellers

Dye penetrant testing of gears and shafts

All photos in this section (52)

Dye penetrant testing of shafts

Dye penetrant testing of shafts

Dye penetrant testing of propellers

Dye penetrant testing of gears and shafts

Dye penetrant testing of gears and shafts

Dye penetrant testing of gears and shafts

Ultrasonic testingDye penetrant testing of propellersDye penetrant testing of gears and shafts

Dye penetrant testing of welded jointsUltrasonic testingUltrasonic testing

Dye penetrant testing of propellersDye penetrant testing of gears and shaftsDye penetrant testing of shafts

Dye penetrant testing of welded jointsDye penetrant testing of welded jointsDye penetrant testing of flanges and fasteners

Dye penetrant testing of flanges and fastenersDye penetrant testing of flanges and fastenersDye penetrant testing of shafts

Dye penetrant testing of flanges and fastenersDye penetrant testing of shaftsDye penetrant testing of shafts

Dye penetrant testing of gears and shaftsDye penetrant testing of propellersDye penetrant testing of shafts

Dye penetrant testing of propellersDye penetrant testing of gears and shaftsDye penetrant testing of gears and shafts

Dye penetrant testing of gears and shaftsDye penetrant testing of gears and shaftsDye penetrant testing of gears and shafts

Dye penetrant testing of gears and shaftsDye penetrant testing of gears and shaftsDye penetrant testing of gears and shafts

Dye penetrant testing of gears and shaftsDye penetrant testing of shaftsDye penetrant testing of shafts

Dye penetrant testing of shaftsDye penetrant testing of shaftsDye penetrant testing of shafts

Dye penetrant testing of shaftsDye penetrant testing of propellersDye penetrant testing of propellers

Dye penetrant testing of propellersDye penetrant testing of propellersDye penetrant testing of shafts

Inspection Methods

Visual testing (VT).
Magnetic particle testing (MT).
Penetrant testing (PT).
Ultrasonic testing (UT).
Eddy current testing (ET) — a Level II certified specialist; testing arrangements are agreed for each project.
Surface contact check (Blue test) — assessment of the contact quality when fitting the propeller to the tail shaft.
Ultrasonic thickness measurement.

Watertightness and Leak Testing

Water filling.
Compressed air.
Penetrant leak testing.

Classification Society Approvals

ABS approval for NDT covers UT, PT, MT and VT. ABS approval for Hull Gauging is limited to vessels outside the ESP and ESDC programmes. The Bureau Veritas certificate covers thickness measurements and reporting for BV-classed ships and mobile offshore units. These scopes are not interchangeable: applicability is checked before each order begins.

Technical parameters are provided for preliminary assessment. Suitability for a particular vessel, equipment item and project is confirmed by the shipyard when agreeing the work.

Discuss This Service

ASABA SHIPYARD

We Will Plan the Work Around Your Requirements

Send us your initial specifications — we will agree the scope of work and the necessary technical requirements.

Contact the Shipyard